Seite 3 von 14 ErsteErste 1234513 ... LetzteLetzte
Ergebnis 21 bis 30 von 135

Thema: madVR - high quality video renderer (GPU assisted)

  1. #21
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.75
    * fixed: v0.74 stopped decoder DirectShow filter from being released properly
    * fixed: PotPlayer sometimes crashed when switching video files
    * fixed: internal decoders made problems with cropped MKVs & Haali Splitter
    * fixed: OSD sometimes didn't appear in ZoomPlayer in exclusive mode
    * fixed: VP70 decoder showed video upside down
    * fixed: RGB24 input sometimes crashed madVR
    * fixed: ffdshow RGB input level detection sometimes failed
    * subtitles run through the 3dlut now, too
    * internal decoders are now auto disabled if required decoder dlls are missing
    * added option to scale Luma in linear light, disabled by default
    * RGB input with unknown range is now treated by default as full range
    * added detailed information about matrix, primaries and levels to debug OSD
    * updated libav/ffmpeg dlls
    
    v0.76
    * fixed: crash on MPC-HC exit / close file
    * fixed: OSD didn't show properly or didn't show at all
    * fixed: subtitles showed with a black backgroudn
    * fixed: trade quality -> use 10bit chroma option was used for luma sometimes
    * unfortunately subtitles are not running through 3dlut, anymore
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  2. #22
    Erklär-Bär Avatar von LigH
    Registriert seit
    19. April 2003
    Ort
    Gardelegen
    Alter
    41
    Beiträge
    42.008

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Seitenwechsel — Immer noch die selbe Download-URL: http://madshi.net/madVR.zip

    Auf gute Zusammenarbeit:

    REGELN befolgen | SUCHE benutzen | FAQ lesen | STICKIES beachten




  3. #23
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.77
    
    * added support for ffmpeg/libav h264 4:2:2 decoding
    * optimized ffmpeg/libav compiling options
    * fixed: madVR disliked getting 2 frames with identical timecodes all the time
    * modified autodetect priorities slightly
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  4. #24
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.78
    
    * added support for DXVA2 deinterlacing
    * added option to enable/disable automatic activation of deinterlacing
    * added option to force off deinterlacing for 48i sources
    * added option enable/disable performing deinterlacing in a separate thread
    * added auto 4:2:2/4:4:4 to 4:2:0 conversion when using DXVA2 deinterlacing
    * added OSD deinterlacing information
    * Ctrl+Alt+Shift+D turns deinterlacing on/off
    * Ctrl+Alt+Shift+F switches deinterlacing field order (auto, top, bottom first)
    * changed gamma decrease key combo from Ctrl+Alt+Shift+F to Ctrl+Alt+Shift+B
    * increased decoder queue size to 12 frames
    * added support for h264 10bit 4:2:2 decoding
    * improved frame stepping
    * improved internal frame locking mechanism
    * removed warning "creating 10bit render texture failed, used 8bit instead"
    * updated libav/ffmpeg dlls
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  5. #25
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.79
    
    * modified deinterlacing logic to save GPU RAM
    * added resource manager to save GPU RAM and a little bit of GPU performance
    * added information about used / total GPU RAM to debug OSD (Ctrl+J)
    * added new options to choose decoder and GPU queue sizes
    * added automatic adjustment of queue sizes, based on GPU RAM size
    * corrected queue sizes with deinterlacing turned on (size 1 too high in v0.78)
    * improved deinterlacing quality at the start of playback and after seeks
    * improved the way madVR calls DXVA2 (now more similar to EVR)
    * moved some eventually CPU intensive code from render to separate thread
    * optimized performance of DXVA2->PixelShader texture conversion for some GPUs
    * optimized internal libav decoder format conversion logic
    * movie frame rate overwrite via file name now also set deinterlacing on/off
    * option "perform deinterlacing in separate thread" is now "on" by default
    * MPC-HC OSD text "Pausa" is now blocked (to avoid disappearing subtitles)
    * fixed: source cropping (J.River MC) could result in corrupted chroma channel
    * fixed: IMediaSample allocator wasn't fit for decoder queue size of 12 frames
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  6. #26
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.80
    
    * added IVTC algo with decimation and support for 3:2, PAL and Anime cadences
    * Ctrl+Alt+Shift+T switches between video (DXVA) and film (IVTC) content type
    * fixed: moving media player to another monitor made DXVA deinterlacing crash
    * fixed: DXVA deinterlacing produced wrong colors (only with HD videos + ATI)
    * fixed: after a refresh rate change the composition rate didn't update
    * fixed: calculation of consumed GPU RAM was wrong
    * fixed: minimizing ZoomPlayer with playing video made some problems
    * fixed: v0.79 didn't always detect external refresh rate changes
    * fixed: some h264 AVI files made madVR crash, depending on the splitter
    * fixed: improved internal decoder MPEG2 timestamp handling
    * fixed: zooming video extremely small made madVR close the media player
    * fixed: video was positioned wrong when media player cropped top/left
    * fixed: a couple of small Direct3D related bugs
    * fixed: a little resource leak
    * improved presentation timestamp correction a bit
    * improved "IMadVRExclusiveModeInfo::IsExclusiveModeActive"
    * improved "IMadVRExclusiveModeControl::DisableExclusiveMode"
    * added window size checks to detect to-be-expected exlusive mode failures
    * added new interface "IMadVRDirect3D9Manager" for XBMC (work in progress)
    * modified automatic queue sizes
    * improved logging during media player shutdown
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  7. #27
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.81
    * added automatic exception catching functionality
    * added manual freeze report functionality (press Ctrl+Alt+Shift+Break)
    * added option to switch display mode only when media player is in fullscreen
    * added option to restore display mode when media player leaves fullscreen
    * display mode changer now reacts on film (24p) vs. video (60p) content type
    * improved renderer behaviour when display mode changes
    * improved ivtc: faster detection of cadence changes
    * improved ivtc: more robust against compression artifacts
    * deint + ivtc is now auto activated for 60i movies which are tagged to 24 Hz
    * ivtc is now auto activated for 50i movies which are tagged to 25 or 24 Hz
    * deinterlacing is only turned on for 50i and 60i movies now
    * added patch to MS VC-1 decoder -> deinterlacing off
    * modified file name tagging logic (24p, 24i, 24fps, 24Hz, etc)
    * improved behaviour with decoders which don't output proper interlaced flags
    * improved exclusive -> windowed mode behaviour slightly, mainly for ZoomPlayer
    * added "sharpness: 100" option for Bicubic scaling
    * queue sizes are now always 16/8 by default, no more automatic adjustments
    * keyboard shortcuts: always only change things temporarily by default now
    * keyboard shortcuts: some changes (not all) can be stored by pressing F2 now
    * the source levels (TV vs PC) can be stored now
    * the source content type (film vs video) can be stored now
    * key presses are now only "swallowed" if media player process has key focus
    * osd keyboard handling runs in its own thread now
    * added many more languages to the "Pause" MPC-HC message block
    * used GPU RAM is now shown in osd, anymore
    * increased upload thread priority slightly
    * fixed: ZoomPlayer eventually froze when leaving exclusive mode
    * fixed: some users had composition rate in exclusive mode OSD -> problems
    * fixed: crash when video window size was reduced to a very small size
    * fixed: frame stepping sometimes resulted in weird play/pause mixed state
    * fixed: one case where "delay playback start..." resulted in paused state
    * fixed: v210 pitch/stride handling was broken
    * fixed: YV24 had swapped chroma channels
    * fixed: YV24 DXVA deinterlacing resulted in image corruption
    * fixed: OSD API didn't capture mouse events on mouse down
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  8. #28
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.82
    * added: new option to activate deinterlacing if in doubt whether it's needed
    * added: new IVTC option to only look at pixels in the frame center
    * added: IVTC "cadence breaks" information to OSD; resets with Ctrl+R, as usual
    * deinterlacing + IVTC are now always forced on for 60i sources tagged as 24Hz
    * improved IVTC cadence logic
    * improved DXVA deinterlacing behaviour slightly
    * improved display mode change event handling
    * improved exclusive -> windowed switch a little bit more
    * fixed: madVR sometimes didn't notice changed display mode
    * fixed: if DXVA2 deinterlacing was not available in XP, it made madVR crash
    * fixed: crash when moving madVR to another display with ZoomPlayer
    * fixed: freeze when switching subtitles in paused state
    * fixed: closing down madVR didn't always wait for the closing to complete
    * fixed: closing the media player while madVR was in exclusive mode -> freeze
    * fixed: sometimes asking for a freeze report created multiple reports at once
    * fixed: MS DVD Navigator caused error in the primaries/matrix auto detection
    * fixed: when switching from Bicubic to SoftCubic, options weren't updated
    * fixed: red error messages were supposed to disappear after a while but didn't
    * fixed: red error messages no longer show duplicate error messages
    
    v0.82.1
    * fixed: playback is sometimes stuck with a black screen (introduced in v0.82)
    * fixed: seeking sometimes results in frozen video frame (introduced in v0.82)
    
    v0.82.2
    * fixed: SoftCubic was stuck on "softness: 50" (introduced in v0.82)
    * fixed: in certain situations there was a new freeze (introduced in v0.82)
    * fixed: PotPlayer crashed sometimes when turning audio processing on/off
    * fixed: option "if in doubt activate deinterlacing" didn't work properly
    
    v0.82.3
    * fixed: Ctrl+C / File Close didn't work in MPC-HC  (introduced in v0.82)
    * fixed: Ctrl+E in MPC-HC didn't work  (introduced in v0.82)
    * fixed: finalization crash due to stupid bug  (introduced in v0.82)
    
    v0.82.4
    * fixed: 2 more finalization crashes
    * fixed: display mode changer stopped working after a 2nd video file was loaded
    * fixed: filter properties dialog didn't show the full madVR version number
    Geändert von Tom Keller (7. March 2012 um 22:23 Uhr)
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  9. #29
    Kaiser
    Registriert seit
    6. July 2009
    Beiträge
    1.175

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    madVR v0.82.5 released
    
    Code:
    * improved D3D11 exclusive -> windowed switch slightly, still not great, though
    * option "delay playback start..." now requires both GPU+CPU queues to be full
    * fixed: YCgCo decoding matrix was not correct
    * fixed: internal 4:4:4 decoding produced wrong colors (introduced in v0.81)
    * fixed: display mode changer didn't always activate when entering fullscreen
    * fixed: forcing deinterlacing + IVTC on was caused by 30p tag instead of 24p
    * fixed: h264 media type parsing sometimes crashed
    * fixed: crash when no filter in the chain provided frame rate information
    * fixed: one thread was started per video frame (introduced in v0.82)
    * maybe fixed: entering/leaving exclusive mode steals keyboard focus
    Ab jetzt wird es vermehrt diese "Unternumerierung" der Versionsnummer geben, da madshi sonst zu schnell bei "1.0" wäre.

  10. #30
    Erklär-Bär Avatar von LigH
    Registriert seit
    19. April 2003
    Ort
    Gardelegen
    Alter
    41
    Beiträge
    42.008

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Bloß nie "fertig" werden!
    __

    Zu Archivierungszwecken wäre es wohl nett, wenn die ZIP-Datei auch mal Versionsnummern im Namen hätte, nicht immer nur die selbe Datei überschreiben:

    http://madshi.net/madVR.zip

    Auf gute Zusammenarbeit:

    REGELN befolgen | SUCHE benutzen | FAQ lesen | STICKIES beachten




Seite 3 von 14 ErsteErste 1234513 ... LetzteLetzte

Aktive Benutzer

Aktive Benutzer

Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)

Ähnliche Themen

  1. Haalis Video Renderer - Starkes Blocking
    Von Bumsfalara im Forum Abspielprobleme
    Antworten: 27
    Letzter Beitrag: 28. February 2008, 22:07
  2. High Quality - Deinterlacing mit AVISynth
    Von scharfis_brain im Forum AviSynth
    Antworten: 109
    Letzter Beitrag: 3. March 2007, 14:20
  3. Video Renderer im Zoomplayer
    Von aba9291281 im Forum Abspielprobleme
    Antworten: 0
    Letzter Beitrag: 5. May 2006, 02:38
  4. PAL-60 high quality capture
    Von der-doktor im Forum Analoges Video-Capturing
    Antworten: 4
    Letzter Beitrag: 1. February 2004, 14:10

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •