Seite 2 von 14 ErsteErste 123412 ... LetzteLetzte
Ergebnis 11 bis 20 von 135

Thema: madVR - high quality video renderer (GPU assisted)

  1. #11
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.43
    * restored some v0.36 behaviour for exclusive -> windowed switch (XP only)
    * fixed FLV problem (introduced with v0.42)
    * fixed bug which resulted in Aero en/disabling happening incorrectly
    
    v0.42
    * changed aspect ratio reporting back (PotPlayer and JR MC didn't like v0.41)
    * improved forced redrawing of all GUI stuff after exclusive -> windowed switch
    * removed some of the "disable desktop composition" modes
    
    v0.41
    * added workaround for buggy decoders (hopefully it breaks nothing else)
    * added forced redrawing of all GUI stuff after exclusive -> windowed switch
    
    v0.40
    * turning desktop composition back on should be without delay now
    * DXVA NV12 connections are refused now
    
    v0.39
    * fixed: 16:9 DVDs were shown as 4:3 (introduced in v0.37)
    
    v0.38
    * changed mouse cursor management (for J.River MC)
    * added support for NV12 (4:2:0 8bit), P010 (4:2:0 10bit), P016 (4:2:0 16bit)
    
    v0.37
    * IBasicVideo::SetDestinationPosition not needed, anymore (for J.River MC)
    * exclusive -> windowed switch should be a bit faster in Vista+ now
    * added options for disabling desktop composition
    * added workaround for MPC-HC MPEG2 decoder crash with VOB files (decoder bug)
    * settings dialog now remembers the page you've been on
    * fixed small bug in video levels output math
    
    v0.36
    * fixed: settings changes only showed affect after reloading the video
    * fixed: Ctrl+Y didn't work properly, anymore
    * hopefully fixed: madVR startup delay on some PCs
    
    v0.35
    * reverted back to v0.32 clock logic (no more clock jitter removal)
    * fixed: ESC (= pause + minimize) in KMPlayer in exclusive mode -> freeze
    * fixed: multi monitor device management didn't fully work
    * maybe fixed: problem with ZP + MKV splitter + exclusive mode + playlist
    * added logging to gather more info about one instance of madVR freezing
    
    v0.34
    * fixed: resizing media player window made problems (introduced with v0.33)
    
    v0.33
    * fixed: crash when source filter didn't allocate chapter names
    * added algorithm to remove audio clock jitter
    * added country flags for video/audio/subtitle tracks in tray icon menu
    * moved "close media player" above audio/subtitle tracks in tray icon menu
    * modified clock deviation measurement algorithm
    * added "ideal refresh rate" information to OSD
    * added madVR version number to debug log output
    * "video size changed" event is sent more selectively, now
    
    v0.32
    * fixed: calculation of estimated frame drops/repeats was incorrect
    * fixed: one madVR shutdown crash cause
    * fixed: log file was held locked even after madVR finalization
    * simplified tray icon menu structure (less submenus)
    * left and right click on tray icon shows different context menus now
    * added monitor/receiver device management functionality to settings logic
    * monitor/receiver devices are now automatically detected and identified
    * monitor related settings are now stored separately per monitor device
    * ffdshow is not asked for audio/subtitle streams, anymore (stability issues)
    
    v0.31
    * fixed: sometimes frames were incorrectly dropped in paused state
    * fixed: SoftCubic100 didn't stick for Luma up/downscaling
    * fixed: media player icon was not transfered correctly from win7 to XP
    * local communication is not done via TCP/IP, anymore -> no firewall problems
    * the exe/dll/ax files are now signed to reduce anti virus false alarms
    * added reference vs. system "clock deviation" information to OSD
    * added information about estimated number of dropped/frames per second to OSD
    * uninstall.bat now automatically removes the tray icon
    * added new option "delay switch to exclusive mode for 3 seconds"
    * renamed some settings folders
    
    v0.30
    * fixed: some scaling options didn't "stick"
    * added workaround for stack overflow with some videos (not madVR's fault!)
    * madVR settings dialog is now "always on top"
    * tray icon configuration dialog is now "always on top"
    
    v0.29
    * fixed: crash when trying to enter the 3dlut settings tab
    * fixed: settings dialog didn't work when tray icon was disabled
    * fixed: tray icon didn't properly go away in certain circumstances
    
    v0.28
    * fixed: seek bar was sometimes shown even with exclusive mode disabled
    * fixed: logging could result in frame drops
    * fixed: new frame drop logic (v0.27) sometimes dropped more than necessary
    * fixed: sometimes madVR started with a black screen and then crashed
    * maybe fixed: exclusive mode didn't work with interlaced refresh rates
    * full rewrite of settings logic
    * first draft of completely new settings dialog
    * added "mad* home cinema control" tray icon
    * added tray icon configuration dialog
    * added media player controls (play, pause, stop, exit) to tray icon
    * added video/audio/subtitle switching functionality to tray icon
    * added chapter selection functionality to tray icon
    * added seek intervals to tray icon
    * added automatic listing of media players running madVR on any PC in the LAN
    * added LAN media player remote control abilities to tray icon
    * sysinternals ProcessExplorer is not "overpowered", anymore
    * removed timing model tweak option
    
    v0.27
    * fixed: after switch to windowed mode seek bar sometimes stayed active forever
    * fixed: sometimes after a Direct3D reset, rendering stopped working
    * exclusive mode does now "overpower" all other processes, except task manager
    * frame drop/delay logic fully rewritten
    * when switch to exclusive mode fails, madVR now goes back to windowed mode
    * madVR seek bar is now also shown in fullscreen windowed mode
    * added forced OSD display "PC/TV levels" when using Ctrl+Alt+Shift+Y
    * modified dynamic media type change handling a bit to reduce overhead
    
    v0.26
    * fixed: windows on primary monitor were seen as covering secondary playback
    * fixed: when starting in fullscreen mode, madVR's seek bar didn't work
    * fixed: starting ZoomPlayer in fullscreen exclusive mode made problems
    * when "maximizing" the media player, exclusive mode is activated at once now
    * exclusive mode switch is now done after 3 seconds instead of 1 second
    * while exclusive mode is active, media player window is made topmost now
    * windowed tweak "timing model" is now used for exclusive mode, too
    * changed Aero timing mode once again
    * added forced OSD display "windowed" vs. "exclusive" when switching
    * new interface allows media players to ask whether madVR is in exclusive mode
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  2. #12
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.46
    * reverted change introduced in v0.43 which might have caused instability
    * modified subtitle syncing logic
    * ISubRenderCallback is now only used for MPC-HC builds >= 1.5.2.2988
    
    v0.45
    * fixed: video rectangle was sent incorrectly to subtitle renderer
    
    v0.44
    * fixed ZoomPlayer OSD graphical corruption problem (again)
    * fixed bug in OSD text message handling
    * added support for subtitle rendering through ISubRenderCallback
    Geändert von Tom Keller (21. March 2011 um 07:38 Uhr)
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  3. #13
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.53
    * moving madVR to another monitor during playback is now properly handled
    * a couple more tweaks to the new exclusive mode rendering path
    * vsync handling now uses its own Direct3D device instance
    * improved handling of rendering failures
    * OSD: rendering/presentation stats are now only shown when they're meaningful
    * OSD: queue and dropped frames information is now directly next to each other
    
    v0.52
    * fixed: presentation glitches were not reported at all
    * fixed: reaction to presentation glitches was (very) wrong
    * added some more fixes and tweaks to the new exclusive mode rendering path
    * fixed: seek bar sometimes got stuck with new exclusive path when paused
    * fixed: starting in paused mode sometimes failed to show first video frame
    * fixed: pre-render option wasn't always enabled/disabled correctly
    * debug OSD is now green instead of red (doom9 majority wish)
    
    v0.51
    
    * fixed: seeking while paused with new exclusive path didn't update image
    * added D3D9 tweak to allow pre-rendering of more than 3 frames
    * added a number of fixes and tweaks to new exclusive mode rendering path
    * readded "presentation glitches" to OSD, but only for new exclusive path
    * added option to choose the no of pre-rendered frames for new exclusive path
    
    v0.50
    
    * added new exclusive mode rendering path
    * added option to use the old exclusive mode rendering path
    * fixed: settings window suddenly showed in taskbar, wasn't supposed to
    * changed "disable desktop composition" default setting to "off"
    * removed option "upload frames in render thread", forced to "off" now
    * removed "presentation glitches" information from OSD (was always 0, anyway)
    * madHcNet doesn't initialize WinSock, anymore, when LAN access is disabled
    
    v0.49
    * fixed: settings could not be edited if a monitor had a unicode name
    * fixed: settings dialog with tray icon disabled took a long time to appear
    * fixed: sometimes "madVR instance didn't reply properly" appeared
    * settings are now stored under "HKCU\Software\madshi\madVR\Settings", too
    * LAN support is disabled by default now, can be enabled through tray icon menu
    
    v0.48
    * fixed: resource leak in OSD text messages
    * disabled "Play" and "Pause" OSD messages until rendering chain is rewritten
    * added support for ISubRenderCallback2, appears to fix subtitle sync problems
    
    v0.47
    * fixed: madVR didn't close properly
    Geändert von Tom Keller (14. April 2011 um 21:37 Uhr)
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  4. #14
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.58
    * fixed: 23p/59i movie did not activate 59p display mode
    * removed v0.57 win7 specific presentation path again, didn't work so well
    * added glitch hack as a new render option (Vista/Win7 only)
    
    v0.57
    * added (simple) automatic display mode changer
    * added slightly modified exclusive presentation path for win7 and newer OSs
    * if decoder doesn't tell the source framerate, madVR searches upstream
    * if DScaler IVTC Mod is in the graph, madVR considers 29.970 to be 23.976
    * if source file name contains framerate token, that overwrites DirectShow info
    * added hack to stop Direct3D from messing up refresh rates
    * added batch file to restore default settings
    * fixed: in XP setting the number of pre-presented frames to 1 didn't work
    * fixed: secondary display attached to a receiver wasn't handled correctly
    
    v0.56
    * fixed: going directly to fullscreen mode made madVR freeze
    
    v0.55
    * a couple of bugfixes and improvements for dual monitor setups
    * added new render option tab named "exclusive mode settings"
    * moved some exclusive mode options from "general settings" tab to new tab
    * added separate flush options for exclusive mode (old and new path)
    
    v0.54
    * fixed high CPU consumption in new exclusive mode rendering path (hopefully)
    * added option to use windowed mode flush tweaks for new exclusive path, too
    * added batch file to switch between debug <-> release mode
    Geändert von Tom Keller (20. April 2011 um 02:49 Uhr)
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  5. #15
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.61
    * fixed: exclusive -> windowed with D3D11 made media player buttons disappear
    * fixed: exclusive -> windowed with D3D11 made media player window too big
    * fixed: closing video file in D3D11 exclusive mode resulted in crash
    * added new tweak option "overshoot max frame latency"
    
    v0.60
    * fixed: exclusive -> windowed with D3D11 made media player buttons disappear
    * fixed: fullscreen exclusive mode was sometimes not activated properly
    * Windows Key press now forces a 3 second delay before going back to exclusive
    
    v0.59
    * added D3D11 presentation path
    * renamed glitch hack to "use a separate device for presentation"
    * added option to activate D3D11 presentation path
    * switched and renamed option "present only one frame at a time"
    * added tweak option "run presentation in a separate thread"
    * added tweak option "limit rendering times to avoid glitches"
    * added option "restore original display mode when media player closes"
    * added option "treat 25p movies as 24p (requires Reclock)"
    * added detection for "Windows Key" press -> switch out of exclusive mode
    * fixed: having only one mode in the display mode switcher didn't work
    * fixed: when entering fullscreen, sometimes the seekbar incorrectly showed up
    * fixed: changing refresh rate behind madVR's back resulted in a freeze
    * fixed: ZoomPlayer froze when moving to secondary monitor fullscreen playback
    * a couple more minor changes and bugfixes
    Geändert von Tom Keller (28. April 2011 um 20:29 Uhr)
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  6. #16
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.65
    * fixed: decode matrix + source primaries detection only worked once
    * fixed: yet another bug in the automatic display changer
    
    v0.64
    * changed a couple of calibration related texts
    * Ctrl+Alt+Shift+C toggles gamma curve type now instead of Ctrl+Alt+Shift+T
    * Ctrl+Alt+Shift+M toggles decoding matrix
    * Ctrl+Alt+Shift+P toggles source primaries
    * fixed: disabling gamma processing didn't show immediate effect
    * fixed: one more display mode changer bug
    * added support for switch to 59i/60i display mode for 59p/60p content
    * Windows key now only stops exclusive mode when running on primary monitor
    * seekbar is now shown only if mouse cursor is on playback monitor
    * when the PC is locked (Windows Key + L) madVR now pauses playback
    * fixed: D3D11 playback on secondary monitor could result in window size bug
    
    v0.63
    * fixed: couple of bugs in the display mode changer
    * fixed: nearest neighbor in v0.62 was broken (bilinear was used instead)
    * fixed: removed nonsense 9bit/10bit display bitdepth options
    * fixed: yCMS tab in settings dialog is now only visible on calibration page
    * added: complaint when yCMS is selected, but no gamut measurements provided
    * added new "enable gamma processing" option (default = off)
    * renamed "something else" to "unknown"
    * moved gamut/gamma options from "properties" page to "calibration" page
    * gamut/gamma options in calibration page are now grayed out when using 3dlut
    * gamma processing can't be enabled if calibration -> gamma is set to "unknown"
    * added primary/gamut "sRGB" option
    
    v0.62
    * added display "properties", "calibration" and "color & gamma" settings pages
    * added option to define the native display bitdepth (affects dither strength)
    * added options to define how the display was calibrated (gamut + gamma)
    * moved "Video/PC levels" option to display "properties" settings page
    * added options to define which gamma / transfer function to use
    * replaced old "use 3dlut" option with new controls on "calibration" page
    * added integrated GUI for yCMS 3dlut creation, no more console hacking needed
    * added "please wait" dialog while yCMS is downloaded + installed
    * added "please wait" dialog while 3dlut file is created
    * added support for 6 and 7 bit 3dlut files (see trade quality for performance)
    * added option to choose a manually created external 3dlut file (per display)
    * there's only one 3dlut file per display now
    * 3dlut is now always yRGB / RGB_Video input and RGB_Video output
    * YCbCr -> RGB conversion is now always done by shader math, not by 3dlut
    * Video/PC levels conversion is now always done by shader math, not by 3dlut
    * rewritten rendering and pixel shader chain
    * subsampled YCbCr is now upsampled & converted to RGB first, then scaled
    * chroma upsampling got quite a bit faster (because it's now always exactly 2x)
    * luma scaling got a tiny bit faster, depending on scaling factor and taps
    * Strg+Alt+Shift+C displays & toggles color format (BT.709 -> BT.601 -> PAL)
    * Strg+Alt+Shift+G displays and increases the Gamma value (2.20 -> 2.25 -> ...)
    * Strg+Alt+Shift+F displays and decreases the Gamma value (2.20 -> 2.15 -> ...)
    * Strg+Alt+Shift+T displays and changes the Gamma curve type (pure power / BT)
    * dither is using a texture again instead of shader math
    * dither is now colored and differs for every video frame
    * added support for  8 bit 4:2:0 media types IYUV, I420, NV21, ICM*
    * added support for  8 bit 4:2:2 media types YUY2, YVYU, UYVY, YV16, yuv2, ...
    * added support for  8 bit 4:4:4 media types AYUV, YV24, I444, v308, v408
    * added support for  8 bit RGB   media types RGB32, RGB24, BGRA, ABGR, RGBA
    * added support for 10 bit 4:2:2 media types P210, Y210, v210
    * added support for 10 bit 4:4:4 media types Y410, v410
    * added support for 16 bit 4:2:2 media types P216, Y216, v216
    * added support for 16 bit 4:4:4 media types Y416, v416
    * added support for 16 bit RGB   media types RGB48, RGB64, b48r, b64a, ...
    * added hints to "install.bat" and "readme.txt" to not delete the madVR folder
    * fixed: madVR rendering window in GraphEdit didn't have correct size
    * changed VSync priority back to "time critical"
    * slightly changed tray icon mouse click behaviour
    Geändert von Tom Keller (8. June 2011 um 05:37 Uhr)
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  7. #17
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.66
    * rewritten large parts of the OSD logic
    * added APIs for media player devs to draw their OSDs/GUIs in exclusive mode
    * added API for media player devs to disable the madVR seekbar
    * fixed: OSD is now above subtitles instead of under
    * OSD + seekbar are now drawn to full window size, not to video rect, anymore
    * madVR debug OSD is now white with a dark background
    * using higher internal precision for internal calculations now
    * fixed a couple of bug in gamma / gamut / 3dlut processing
    * instead of yRGB, madVR/yCMS are now using the measured display primaries
    * improved compatability with uncompressed video files
    * fixed: avisynth -> ffdshow -> RGB -> madVR produced upside down image
    * fixed: seekbar showed up when playback monitor was positioned "under" primary
    * simplified calibration settings a bit more
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  8. #18
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.69
    * fixed: (again) timestamp for libav/ffmpeg decoders
    * another seeking improvement
    
    v0.68
    * added support for all primaries referenced by h264, VC-1, MPEG2 and MS
    * added support for all decoding matrices referenced by h264, VC-1, MPEG2 & MS
    * primaries, matrix and range are now read from VC-1, MPEG2 and h264 headers
    * ffdshow RGB output levels are now automatically detected and handled properly
    * added support for primary, matrix and range info via DirectShow media type
    * improved primary and matrix guesses, if no detailed information is available
    * primaries, matrix and range are auto set to what the source requires
    * VC-1, MPEG2, h264 headers are read from external decoders, without their help
    * Ctrl+Alt+Shift+I toggles input levels (source = full range or not)
    * added info to OSD about video bitstream and madVR raw video input formats
    * improved internal decoder seeking behaviour
    * video bitstream AR is used now if no container AR is available
    * libav decoder is now automatically used if Intel decoder can't handle a file
    * Intel decoder is now automatically used for interlaced VC-1 content
    * fixed: some new problems with external decoders, introduced in v0.67
    * fixed: crashes with Intel decoder during playback or when seeking
    * fixed: libav/ffmpeg decoder crashed with full_range h264 videos
    * fixed: bad timestamps with internal libav/ffmpeg decoder
    * fixed: libav/ffmpeg VC-1 decoder showed corruption at the bottom of the image
    * fixed: graphical corruption with internal decoders in certain situations
    * fixed: connection to 4:2:2 h264 streams is now declined
    
    v0.67
    * added libav/ffmpeg Software Decoders for MPEG2, VC-1 and h264 (experimental)
    * added Intel        Software Decoders for MPEG2, VC-1 and h264 (experimental)
    * added new option "delay playback start until render queue is full"
    * added new interface IMadVRRefreshRateInfo for media player developers
    * fixed: OSD was updated all the time, even in paused state
    * fixed: when using GraphEdit, madVR video window was sometimes too small
    * fixed: madVR asked upstream filter to change output FourCC without need
    Geändert von Tom Keller (25. July 2011 um 02:48 Uhr)
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

  9. #19
    DAS_CHAOS Avatar von Scratty
    Registriert seit
    28. April 2005
    Beiträge
    75

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    madVR v0.70
    
    * delay times improved for option "pause playback until render queue is full"
    * option "pause playback until render queue is full" is now disabled by default
    * exclusive mode tweak options regrouped and branded as "not recommended"
    * internal MPEG2/h264 decoders are enabled by default now, VC-1 stays disabled
    * display mode switcher now "likes" 24.000 Hz mode for 23.976 fps movies better
    * improved timestamps of internal libav/ffmpeg MPEG2 decoder
    * improved seeking with internal libav/ffmpeg h264 decoder
    * fixed: moving from one monitor to another sometimes caused graph to pause
    * fixed: display mode changer caused internal decoders to stop working
    * fixed: gamma processing with RGB input produced a black screen
    * fixed: h264 mediatype parsing corrupted RAM, eventually resulting in a crash
    * fixed: color processing accurateness problems introduced in v0.68
    * fixed: exclusive mode seekbar didn't work during DVD playback
    * fixed: tracks with a "|" in the name confused the tray icon context menu
    * fixed: at playback start, and after unpausing there was sometimes judder
    * fixed: OSD sometimes flickered at playback start, and after unpausing
    Geändert von Scratty (26. July 2011 um 09:57 Uhr)
    OPERATIVE HEKTIK,ERSETZT GEISTIGE WINDSTILLE



  10. #20
    Scheibenwelt-Bewohner Avatar von Tom Keller
    Registriert seit
    6. November 2004
    Beiträge
    671

    Standard AW: madVR - high quality video renderer (GPU assisted)

    Code:
    v0.71
    * for DVD playback start, "delay playback start..." option is now auto disabled
    * when OSD changes, render queue is cut down to 3/8 to make OSD more responsive
    * when madVR pauses/starts/stops graph, notification message 0xFA17 is sent now
    * fixed: crash with NVidia PureVideo MPEG2 Decoder
    * fixed: crash with h264 AVI content
    * fixed: unpause delay with internal decoders in exclusive mode
    * fixed: subtitles disappeared when pausing playback
    * fixed: madVR caused "File Source Async" to never be destroyed
    * fixed: full range YCbCr input showed a green tint (introduced with v0.70)
    
    v0.72
    * empty file "force full range input" in madVR folder overwrites auto detection
    * empty file "YCbCr" in madVR folder makes madVR output YCbCr data directly
    * fixed: video playback in PotPlayer froze in various situations
    * fixed: display mode change + "delay playback start..." -> video stayed paused
    
    v0.73
    * fixed (again): video playback in PotPlayer froze in various situations
    * fixed: OSD changes could result in dropped frames (reverted to older code)
    * fixed: crash if the source filter reported a NULL file name
    
    v0.74
    * fixed: internal decoder showed 10bit video with non-mod-4 width distorted
    * fixed: primaries/matrix auto detection eventually failed if ffdshow upscaled
    * fixed: MPEG2 internal decoder timestamps didn't work well with DVDs/VOBs
    * fixed: ZoomPlayer "Media: Next Track" -> OSD "windowed" stayed forever
    * fixed: corruption with ordered chapters, when using internal decoders
    * added new interface "IMadVRExclusiveModeControl"
    * added new interface "IMadVRSettings"
    * added support for h264 files with a 3-byte NAL length
    Geändert von Tom Keller (22. August 2011 um 21:29 Uhr)
    Who is General Failure and why is he reading my hard drive?

    He was trying to get in touch with Private Data but if it involves a Major Disaster I understand that the fault lies with General Protection.

    Furthermore, if you cannot reboot it may be because of a corrupt Colonel.

Seite 2 von 14 ErsteErste 123412 ... LetzteLetzte

Aktive Benutzer

Aktive Benutzer

Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)

Ähnliche Themen

  1. Haalis Video Renderer - Starkes Blocking
    Von Bumsfalara im Forum Abspielprobleme
    Antworten: 27
    Letzter Beitrag: 28. February 2008, 22:07
  2. High Quality - Deinterlacing mit AVISynth
    Von scharfis_brain im Forum AviSynth
    Antworten: 109
    Letzter Beitrag: 3. March 2007, 14:20
  3. Video Renderer im Zoomplayer
    Von aba9291281 im Forum Abspielprobleme
    Antworten: 0
    Letzter Beitrag: 5. May 2006, 02:38
  4. PAL-60 high quality capture
    Von der-doktor im Forum Analoges Video-Capturing
    Antworten: 4
    Letzter Beitrag: 1. February 2004, 14:10

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •