Ergebnis 1 bis 7 von 7

Thema: Tranzcode + TranzGUI

  1. #1
    Miles Freak Avatar von daphy
    Registriert seit
    11. June 2003
    Beiträge
    153

    Icon4 Tranzcode + TranzGUI

    Hi folks,

    hab gestern einen Upload eines neuen Trancoders bekommen:

    Zitat Zitat von aus Doom9 (englisch)
    Tranzcode (by Austin Forgotten)
    is a new decoding splitting tool which offers many ways of decoding multichannel WAV and DTS/DTSWAV files!

    Description:
    ---------------
    A windows command line utility used to transcode multichannel wav files into mono wavs by outputting
    the number of wavs depending on the number of channels read from the wav header. Will also
    decode/transcode .dts files (48kHz) and DTSWav (44.1kHz) directly into mono wavs depending on the
    number of channels found. DTS decoding was made available using libdts from dtsdec source code
    written by Gildas Bazin with some help from Sam Hocevar which was based on a52dec code with
    original credits going to Aaron Holtzman and Michel Lespinasse. Modifications were made to output
    mono wavs directly, including LFE output. Currently there is no AC-3 support, but plans for it in the future.
    ...
    Multichannel Transcoding:
    ---------------------------------
    Mono wav output
    will be PCM (non extensible), and have the same bit resolution and sample rate as the multichannel source
    wav. Supports very large wavs files (> 4GB), including wav extensible format. Supports 2-ch (stereo), up
    to 18 channels. If a mono wav is transcoded, the result will be an "empty" or blank wav with the same
    characteristics as the source wav.
    Suffix naming convention: Is the same as the output order (as displayed during transcoding):
    2 channels:
    -L (Left)
    -R (Right)
    3 channels:
    -L (Left)
    -R (Right)
    -C (Center)
    4 channels:
    -FL (Front Left)
    -FR (Front Right)
    -BL (Back Left)
    -BR (Back Right)
    5 channels:
    -FL (Front Left)
    -FR (Front Right)
    -C (Front Center)
    -SL (Surround "Back" Left)
    -SR (Surround "Back" Right)
    6 channels:
    -FL (Front Left)
    -FR (Front Right)
    -C (Front Center)
    -LFE (Low Frequency Effect)
    -SL (Surround "Back" Left)
    -SR (Surround "Back" Right)
    7 channels:
    -FL (Front Left)
    -FR (Front Right)
    -FC (Front Center)
    -LFE (Low Frequency Effect)
    -BL (Back Left)
    -BR (Back Right)
    -FLC (Front Left Center)
    ...
    DTS Transcoding:
    -----------------------
    Transcoded .dts (48kHz) and DTSWav (44.1kHz) files into 32 bit float mono wavs regardless of the bit
    resolution they were originally encoded with. The number of output mono wavs depends on the number
    of channels read. There is also a downmix option (/S) to output a 16 bit stereo wav. It does not support DTS ES
    The output order (is the same as displayed during transcoding):
    Usually as 6 or 5 channels, having the suffix name appended as follows:
    (note: SL & SR were used instead of BL (Back Left) & BR because I got accustomed to the naming convention)
    6 channels:
    -FL (Front Left)
    -FR (Front Right)
    -C (Front Center)
    -LFE (Low Frequency Effect)
    -SL (Surround "Back" Left)
    -SR (Surround "Back" Right)
    5 channels:
    -FL (Front Left)
    -FR (Front Right)
    -C (Front Center)
    -SL (Surround "Back" Left)
    -SR (Surround "Back" Right)
    ...

    Some examples of its usage:
    1) Transcodes to (6) 32 bit float mono wavs using "temp-" as the output prefix name:
    tranzcode "Us and Them.dts" temp
    outputs: temp-FL, temp-FR, temp-C, temp-LFE, temp-SL, temp-SR
    2) Transcodes to (6) 32 bit float mono wavs using "-" as the output prefix name:
    tranzcode "Us and Them.dts"
    outputs: Us and Them-FL, Us and Them-FR, Us and Them-C, Us and Them-LFE, Us and Them-SL, Us and Them-SR
    3) Transcode to (2) 32 bit mono wavs (selected channels only/cancels the others):
    tranzcode Us_and_Them.wav /+C,LFE
    outputs: Us_and_Them-C, Us and Us_and_Them-LFE
    4) Transcode to (4) 32 bit mono wavs (selected channels are cancelled):
    tranzcode Us_and_Them.wav test /-C,LFE
    outputs: test-FL, test-FR, test-SL, test-SR
    5) Downmix to a 16 bit stereo wav without gain adjust:
    tranzcode "Us and Them.dts" /S
    outputs: Us and Them-(stereo).wav
    6) Downmix to a 16 bit stereo wav with 15% (lower) gain adjustment (x .15):
    tranzcode Us_and_Them.wav" "downmix test" /S@15%
    outputs: downmix test-(stereo).wav
    more infos can be found inside the readme.txt
    download:
    you will find it on needfulthings (inclusive the latest TranzGUI version by Kurtnoise13)
    and on Austin Forgotten´s Homepage
    Kurtnoise vom BeLight-Projekt hat berereits Interesse geäußert, u.U. gibts also bald ein GUI (seis innerhalb BeLight)

    Doom9 Thread
    http://forum.doom9.org/showthread.php?s=&threadid=93926

    Edit:
    Update Tranzcode v0.30
    Update TranzGUI v1.4
    Geändert von daphy (14. June 2005 um 06:57 Uhr) Grund: neue TranzGUI Version

  2. #2
    Erklär-Bär Avatar von LigH
    Registriert seit
    19. April 2003
    Ort
    Gardelegen
    Alter
    39
    Beiträge
    39.611

    Standard AW: Tranzcode v0.20 - neuer Findling

    Und AC3-Unterstützung ist auch geplant... Obwohl: Da verlasse ich mich wohl besser auf Azid, solange nicht angegeben ist, dass auch ProLogic-Downmix unterstützt wird.

    Auf gute Zusammenarbeit:

    REGELN befolgen | SUCHE benutzen | FAQ lesen | STICKIES beachten




  3. #3
    Miles Freak Avatar von daphy
    Registriert seit
    11. June 2003
    Beiträge
    153

    Standard AW: Tranzcode v0.20 - neuer Findling

    gute Frage, habs weitergeleitet ...

  4. #4
    Miles Freak Avatar von daphy
    Registriert seit
    11. June 2003
    Beiträge
    153

    Standard AW: Tranzcode v0.20 - neuer Findling

    TranzGUIv1.3 von Kurtnoise13 ergänzt

  5. #5
    Erklär-Bär Avatar von LigH
    Registriert seit
    19. April 2003
    Ort
    Gardelegen
    Alter
    39
    Beiträge
    39.611

    Standard AW: Tranzcode + TranzGUI

    Sehe gerade, dass du den "Titel des ersten Beitrages im Thema" geändert hattest. Dadurch wird aber der "Titel des Themas" nicht mit geändert - das muss ein Moderator tun.

    Auf gute Zusammenarbeit:

    REGELN befolgen | SUCHE benutzen | FAQ lesen | STICKIES beachten




  6. #6
    Miles Freak Avatar von daphy
    Registriert seit
    11. June 2003
    Beiträge
    153

    Standard AW: Tranzcode + TranzGUI

    Thx

  7. #7
    Miles Freak Avatar von daphy
    Registriert seit
    11. June 2003
    Beiträge
    153

    Standard AW: Tranzcode + TranzGUI

    TranzGUIv1.4 von Kurtnoise13 ergänzt

Aktive Benutzer

Aktive Benutzer

Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •